Foam Wall Insulation - Denton Tx.
Insulation:
Adams Exteriors uses Homesulate wall foam insulation. Homesulate™ wall foam can be preformed from either the inside of the home or from the exterior depending on the customers requirements. Homes sided with shingle, clapboard, brick, and stucco can be insulated quickly and efficiently.
Homesulate foam insulation has the highest R value of any retrofit foam insulation today at 5.1 Rs per inch, a full 45% greater than fiberglass and 30% above blown in cellulose. Depending on the age of your home and the condition of your existing insulation, Homesulate™ can save you up to 50% on the energy bills. Homesulate™ foam insulation is excellent for older homes where home insulation has deteriorated or there is little insulation to begin with.
Installation:
Wall foam is installed through 3/4" holes drilled through the wall on the outside of your home. Once the cavity is filled with insulation, mortar fills the holes.
Soundproofing:
Wall foam has an outstanding STC Rating of .53 (a typical brick wall has an STC Rating of .37). Homesulate™, with its extreme sound dampening characteristics, has been used extensively in schools, hospitals, universities, and residential housing as insulation and soundproofing. Homesulate™ quickly installs the wall foam from the exterior of the home, using very small injection holes to fill the cavities and air gaps in your exterior (and interior) walls that allow unwanted outside noise into your home.
Quick Quote
- Vinyl Replacement Windows are specifically manufactured for energy efficiency.
- Vinyl Frame is less conductive and resists heat transfer. Vinyl Windows also adjust to the natural movement of the typical North Texas home.
- A reflective mixture, added to the glass, allows visible light to pass while resisting UV (heat).
- Not only are there two panes of glass but each is very thick and divided by a large gap that is filled with dense gas.
- The same things that make a window energy efficient also make it sound efficient.
- Vinyl Window Frames conduct less sound than metal (aluminum / steel) window frames.
- Because the window doesn't conduct as much heat, the seals never heat up to the point of failure that would allow sound to pass.
- Thicker glass, along with Laminated Glass and dissimilar glass, available with replacement windows can drastically reduce sound transmittance.
- Vinyl Replacement Windows tilt inward. Cleaning the outside glass from inside is easy. No more ladders.
- Grids of Vinyl Replacement Windows are installed BETWEEN the two panes of glass. The result is an interior and exterior solid piece of glass with no grid edges to clean around.
- Most vinyl replacement window sashes can be tilted inward allowing easy cleaning of the exterior glass from the inside of the home.
Daily Window Info
Efficient Window Collaborative
Heating Season Savings
In climates with a significant heating season, non-energy efficient windows can represent a major source of unwanted heat loss, discomfort, and condensation problems. In recent decades, windows have undergone a technological revolution. It is now possible to have lower heat loss, less air leakage, and warmer window surfaces that improve comfort and minimize condensation. The graphs below illustrate the simulated savings in heating season costs associated with energy efficient windows for a typical house in a heating-dominated climate. The savings shown do not include possible savings from reduced air leakage. Depending on the condition of the old windows in an existing home, the savings can be higher if window replacement leads to long-term air leakage reduction.
Quick Links
Chamber of Commerce
Recent Projects
Area Served
Locations
Adams Exteriors
3010 LBJ Freeway, 12th Floor
Dallas Tx. 75234 USA
(214)349-7283
info@adamsexteriors.com
Adams Exteriors - Ft Worth
9500 Ray White, 22nd Floor
Ft. Worth Tx. 76244 USA
(817)898-0149
terrant@adamsexteriors.com
Adams Exterior - Plano
1120 E.15th St. #3109
Plano Tx. 75074 USA
(469) 619-2607
plano@adamsexteriors.com
Getting the ball rolling
1. Call or Quick window Quote
The best way to get started is to call or email our office or save time by filling out our "Quick Quote" form (right).
One of our representatives is waiting to help you with your project. We will ask about your specific situation and do everything that we can to help you with your project.
Even if you're not sure who to call or what kind of company might handle your work... if we can't help, we will do our best to point you in the right direction.
2. Window Estimates
Window Estimates are always scheduled at the customers convenience. They are detailed, prompt and always free of charge..
At Adams Exteriors we do our best to provide estimates that are valid for a long period of time throughout Dallas and Ft. Worth. We would like to offer every customer the opportunity to consider every option before making a commitment that they might later regret. We DO NOT pressure our potential customers the way that some others do. In return, we ask only for the opportunity to compete for your work.
3. Order, Manufacture & Delivery
Once the estimate is accepted, the ordering and vinyl window manufacturing process could take two weeks or four weeks, depending upon the product (large windows, tempered glass).
Vinyl Windows often take 2 weeks to manufacture. However, Adams Exteriors is commited to the process of correctly ordering and scheduling the delivery of all matericals in a timely manner.
4. Installation & Inspection
It is unusual for a window project to take longer than a day for installation. Adams Exteriors is proud to employ some of the best window installers in the area. Adams Exteriors - windows would like each of their customers to feel like their time is valued and schedule is respected.
The project is not finished until after a full inspection.